Terminals for live work and bridging CD74…G28
Application:
Terminals for earthing, bridging or branching from a bare line or from a clevis terminal mounted on a PAS type conductor. Work may be performed under voltage using an insulating stick.
Main line: Cu or Al. bare.
Branch: Al. in isolation
- Clamping on the main line using an eyebolt with a tightening torque of 30 Nm. If the eye on the bolt is damaged, the clamp can be removed using a 13 mm socket wrench
- The branch wire is attached to the terminal using a press-fit connector
- The branch wire can be attached from the top or bottom of the terminal
- The connector is secured on both sides by sealing caps and a cap equipped with an indicator for the correct positioning of the branch cable
- Branch wire insulating coating thickness range: 1.5-3 mm
- The clamp and the connector connected to it are made of corrosion-resistant metal alloys. The rubber pads are made of rubber resistant to changing weather conditions and UV radiation
| Symbol | Main line section [mm2] |
Branch line cross section [mm2] |
||
|---|---|---|---|---|
| Al (AFL) | Cu | Al (AFL) | Cu | |
| CD74 AP54 G28** | 17-75 | 50 | ||
| CD74 AP 06** | 17-75 | 16-60 | ||
| CD74 AM 06** | 25-150 | 16-95 | ||
| CD74 AG 06** | 50-300 (235) | 25-240 (235) | ||
| CD74 CPP 86* | 12-75 | 16-60 | 16-50 | |
| CD74 CP 86* | 12-75 | 16-50 | ||
| CD74 CGP 86* | 25-120 | 16-200 | 16-120 | |
| CD74 CG 86* | 25-120 | 16-120 | ||
* Branch cable connection – crimped. Clamp only for branches with PAS cables
** Branch cable connection – screw
All clamps can be ordered in the following options:
Option K – Clamp equipped with protection against over-tightening (max. 30 Nm).
Option G – For insulated wire (PAS).
Option F – Clamp equipped with a nut that controls the tightening force.
Option K – Clamp equipped with protection against over-tightening (max. 30 Nm).
Option G – For insulated wire (PAS).
Option F – Clamp equipped with a nut that controls the tightening force.
Terminals for live work and bridging