Ribbon-resin pass-through type J3SI 24 CPI (paper-paper)
Application:
Joint designed for connecting and repairing three-core paper-insulated cable type H(A)Kny, H(A)KnFtA, H(A)KnFty, H(A)KnFpy, H(A)KnFpA with rated voltage of 8.7/15 kV and 12/20 kV.
Construction:
- Connection of working cores using thick-walled, pressed or screw connectors with a partition
- Reconstruction of proper insulation using crinkled, insulating impregnated paper
- Reconstruction of the semiconducting screen using crinkled, semiconductive impregnated paper
- Connection of lead and steel armours using springs with constant pressure force and a 50 mm2 tinned copper braid, secured with EPR tape, protecting against resin penetration into the connection
- Seals made of mastic and EPR tapes block moisture during operation of the device
- Reconstruction of the external coating by means of epoxy resin injection using the injection sleeve included in the kit
Properties:
- Efficient and uncomplicated installation
- Making a sleeve without the need to use an injection gun and heat sources, e.g. a gas burner
- Two types of joints for a wide range of core cross-sections
- Laying directly in the ground or in cable ducts
- The sleeve is adapted to work vertically, horizontally, and on an arc
Composition:
- The set is a complete set for three wires. The plastic packaging contains all the necessary elements to make a sleeve connection along with assembly instructions and material specifications
- The set does not include connectors for connecting working wires. Connectors can be ordered additionally
| Symbol | Cross section of the working core [mm²] |
Tension [kV] |
Dimensions [mm] L d |
Number of pieces in the package |
|---|---|---|---|---|
| J3SI 24 CPI 50-120 | 50-120 [150] | 8.7/15 and 12/20 | 1240 90 | 1 sleeve, 3-wire set |
| J3SI 24 CPI 50-240 | 50-240 | 8.7/15 and 12/20 | 1250 120 | 1 sleeve, 3-wire set |
Cable Slevees