Connector type CSE 250 angled
Application :
Screened angle connector head (90°) with capacitive measuring point designed for terminating and connecting single-core polyethylene insulated cables with a copper wire screen of the YH(A)KXS, XH(A)KX(S), XUH(A)KXS, XRUH(A)KXS, NA2XS(F)2Y* type with a rated voltage of 6/10 kV, 8.7/15 kV and 12/20 kV with a copper wire screen with switchgears, transformers, motors, equipped with bushings, connectors and type A sockets.
Screened angle connector head (90°) with capacitive measuring point designed for terminating and connecting single-core polyethylene insulated cables with a copper wire screen of the YH(A)KXS, XH(A)KX(S), XUH(A)KXS, XRUH(A)KXS, NA2XS(F)2Y* type with a rated voltage of 6/10 kV, 8.7/15 kV and 12/20 kV with a copper wire screen with switchgears, transformers, motors, equipped with bushings, connectors and type A sockets.
Construction:
- Termination of the working core with a thick-walled, tight, pressed tip with a screw-in, angled pin
- Control of the electromagnetic field and reconstruction of the outer coating of the cable insulation using an integrated UV-resistant, slide-on prefabricated element with a constant pressure force on the cable insulation
Properties:
- Long-term current – 250 A
- Daily alternating current (8 h in a 24 h period) – 300 A
- Waterproof and mechanically resistant to external factors
- The head is adapted to work and operate in vertical, horizontal and intermediate positions, as well as in indoor or outdoor conditions
- Thanks to the use of a prefabricated element with a conductive rubber top layer connected to ground, the head is fully shielded and safe for direct touch
- Efficient and uncomplicated installation
- Manufacturing the head without the need to use heat sources, e.g. a gas burner
- Installation directly in the field, in transformer stations, in switchboards or in the workshop
Composition:
- The set is a complete set for three wires. The cardboard packaging contains all the necessary elements to make the head along with assembly instructions and material specifications
- The set includes terminals for return and working wires
Attention: The head can be connected to the so-called control point of the PPACS device from CATU (available separately), which is used to control the voltage of each phase.
Example: CSE – 250 – 24 – D6 – 120
[CSE – 250] = 250 A angle connector head for polyethylene cable with a rated voltage of [24] = 12/20 kV and insulation diameter [D6] = from 25.4 to 29.0 mm and a working core with a cross-section [120] = 120 mm2.
[CSE – 250] = 250 A angle connector head for polyethylene cable with a rated voltage of [24] = 12/20 kV and insulation diameter [D6] = from 25.4 to 29.0 mm and a working core with a cross-section [120] = 120 mm2.
| Symbol | Insulation diameter [mm] |
Cross-sections of the working core [mm²] Voltage range 12 kV 15 kV24 kV |
Number of pieces in the package |
|---|---|---|---|
| CSE-250-24-D1 | 14.0-17.5 | 35 | 1 set for 3 wires |
| CSE-250-24-D2 | 17.5-20.2 | 50-7035-50 | 1 set for 3 wires |
| CSE-250-24-D3 | 20.2-21.9 | 70-955035 | 1 set for 3 wires |
| CSE-250-24-D4 | 21.0-23.2 | 957050 | 1 set for 3 wires |
| CSE-250-24-D5 | 23.2-25.4 | 120-1509570-95 | 1 set for 3 wires |
| CSE-250-24-D6 | 25.4-29.0 | 150-240 95-120 120 | 1 set for 3 wires |
* For other cable construction, please contact the office
MV heads