Heat shrinkable 4-finger breakout boot for voltages 0.6/1 kV

Application:
4-finger heat shrink breakout boot with adhesive designed for insulating, mechanically securing and sealing separated cores of low voltage cables and wires.

Material:
  • Radiation cross-linked polyolefin with hot melt adhesive
Technical data Test methodData
Operating temperatureIEC 216-55°C to +110°C
Tensile strengthASTM D267113 MPa
Tensile strength after ageing (150°C, 168 h)ASTM D267110 MPa
Maximum elongation at break ASTM D638300%
Elongation at break (150°C, 168 h)ASTM D2671250%
Dielectric StrengthASTM D267115 kV/mm
Volume resistivityASTM D87610¹³ Ώ x cm
Dielectric constant EC 250 Max 3.0
Glue properties
Water absorptionISO 621.00%
Softening pointASTM D E2885°C
Peeling forceDIN 366724 N/cm
Impact on copperASTM D2671Non-corrosive
Fungi resistanceISO 846Resistant
Symbol Diameter [D] before shrinking
[mm]
Diameter [d] after shrinking
[mm]
Finger diameter [T] before shrinking
[mm]
Finger diameter [t] after shrinking
[mm]
Length [L]
[mm]
Length [l]
[mm]
Wall thickness [S] before shrinking
[mm]
Wall thickness [s] after shrinking
[mm]
Number of pieces per pack
4-fingered
E4R 10-50 40 15 14 3,5 105 26 2,2 2,0 10
E4R 50-150 75 26 28 7 175 45 3,3 2,9 10
E4R 150-240 82 37 30 9 190 60 4,0 23,0 10

Heat shrink accessories

Product catalog Poland
Sicame Group product catalog

Contact us

+48 22 622 64 01
Sicame Polska Sp. z o.o.
Puławska 366
02-819 Warszawa
Symbol Diameter [D] before shrinking
[mm]
Diameter [d] after shrinking
[mm]
Finger diameter [T] before shrinking
[mm]
Finger diameter [t] after shrinking
[mm]
Length [L]
[mm]
Length [l]
[mm]
Wall thickness [S] before shrinking
[mm]
Wall thickness [s] after shrinking
[mm]
Number of pieces per pack
4-fingered
E4R 10-50 40 15 14 3.5 105 26 2.2 2.0 10
E4R 50-150 75 26 28 7 175 45 3.3 2.9 10
E4R 150-240 82 37 30 7 190 60 4.0 23.0 10
This site is registered on wpml.org as a development site. Switch to a production site key to remove this banner.