Pelican MT 508/36
Application:
It is used for grounding overhead lines supplied with voltage from 1 kV to 52 kV*. In case of grounding of an insulated line type PAS, a clamp or TNDC 28401 FA UZ (see page 31/32) should be used. They allow grounding of a line located up to 10.5 m above the ground without using a lifting device.
Construction:
- Metal telescopic poles.
- Insulated rod.
- Grounding rod. Copper wires
insulated, 10 m long, cross-section 35 mm².
Properties:
- Easy assembly.
- Self-tightening clamp.
- Rigid metal rods (lower Ø 30.6 mm, upper Ø 16 mm).
- Reinforced insulated bar (Ø 36 mm).
- Attaching the cable to the telescopic rod using a screw with a wing nut.
- Scope of application – cables with diameters 3-22mm.
| Symbol | Rated Current Icc [kA/s] | Contents |
|---|---|---|
| MT 508/36 | 8 |
• 3 telescopic rods MT 512/36 L=6.00/2.37 m (2.4 kg) • 1 insulated rod MT 531 – 2 elements L=1.65 m • 1 reel with 3 cables 10 m × 35 mm² with grounding clamps MT 543/35 • 1 grounding rod 1 m MT-650 • 1 bag MT-87-127 2.50 × 0.3 × 0.15 m (10.5 kg) |
Telescopic earthers