Heat shrink 1-core through type J1TH
Application:
Joint designed for connecting single-core cables in PVC, PE, XLPE insulation and sheath type Y(A)(n)KY, Y(A)KXS, X(A)KXS, Y(A)KwXS, X(A)KwXS with a rated voltage of 0.6/1 kV. Technical assessment of the product for compliance with the PN-E-06401-03:1990 and PN-EN 50393:2007 standards.
Joint designed for connecting single-core cables in PVC, PE, XLPE insulation and sheath type Y(A)(n)KY, Y(A)KXS, X(A)KXS, Y(A)KwXS, X(A)KwXS with a rated voltage of 0.6/1 kV. Technical assessment of the product for compliance with the PN-E-06401-03:1990 and PN-EN 50393:2007 standards.
Construction:
- Connection of the working core by means of a connector, pressed or screwed
- Reconstruction of insulation and outer coating using heat shrink tubing
Properties:
- Efficient and uncomplicated installation
- Five types of joints for a wide range of core cross-sections
- Laying directly in the ground or in cable ducts
- Performing a voltage test and putting the cable into operation immediately after completed assembly
Composition:
- The set is a complete set for four single-core joints. The cardboard packaging contains all the necessary elements to make a joint connection along with assembly instructions and material specifications
- The set does not include connectors for connecting working wires. Connectors can be ordered additionally
.
| Symbol | Cross section of the working core [mm²] |
Tension [kV] |
Dimension L [mm] |
Number of pieces in the package |
|---|---|---|---|---|
| J1TH 16-35 | 16-35 | 0.6/1 | 660 | 1 set for 1 strand |
| J1TH 35-70 | 35-70 | 0.6/1 | 660 | 1 set for 1 strand |
| J1TH 70-95 | 70-95 | 0.6/1 | 660 | 1 set for 1 strand |
| J1TH 120-185 | 120-185 | 0.6/1 | 860 | 1 set for 1 strand |
| J1TH 185-240 | 185-240 | 0.6/1 | 860 | 1 set for 1 strand |