Straight connector type CSE 400
Application:
Screened angled connector head (90°) with capacitive measuring point designed for terminating and connecting single-core polyethylene insulated cables with a copper wire screen of type YH(A)KXS, XH(A)KXS, XUH(A)KXS, XRUH(A)KXS* with a rated voltage of 8.7/15 kV, 12/20 kV and 18/30 kV with switchgears, transformers, motors, equipped with insulator bushings, connectors and type B sockets.
Screened angled connector head (90°) with capacitive measuring point designed for terminating and connecting single-core polyethylene insulated cables with a copper wire screen of type YH(A)KXS, XH(A)KXS, XUH(A)KXS, XRUH(A)KXS* with a rated voltage of 8.7/15 kV, 12/20 kV and 18/30 kV with switchgears, transformers, motors, equipped with insulator bushings, connectors and type B sockets.
Construction:
- Termination of the working core with a thick-walled, tight, pressed tip with a screw-in, angled pin
- Control of the electromagnetic field and reconstruction of the outer sheath and cable insulation using an integrated UV-resistant, slide-on prefabricated element with a constant contact force on the cable insulation
Properties:
- Long-term current – 400 A
- Daily alternating current (8 h in a 24 h period) – 500 A
- Waterproof and mechanically resistant to external factors
- The head is adapted to work and operate in vertical, horizontal and intermediate positions, as well as in indoor or outdoor conditions
- Thanks to the use of a prefabricated element with a conductive rubber top layer connected to ground, the head is fully shielded and safe for direct touch
- Efficient and uncomplicated installation
- Manufacturing the head without the need to use heat sources, e.g. a gas burner
- Installation directly in the field, in transformer stations, in switchboards or in the workshop
Composition:
- The set is a complete set for three wires. The cardboard packaging contains all the necessary elements to make the head along with assembly instructions and material specifications
- The set includes terminals for return and working wires
Example: CSE – 400 – 24 – D3 – 120
[CSE – 400] = Connector angle head 400 A, for polyethylene cable with a rated voltage [24] = 12/20 kV and insulation diameter [D3] = from 21.0 to 25.4 mm and a working core with a cross-section [120] = 120 mm2.
[CSE – 400] = Connector angle head 400 A, for polyethylene cable with a rated voltage [24] = 12/20 kV and insulation diameter [D3] = from 21.0 to 25.4 mm and a working core with a cross-section [120] = 120 mm2.
| Symbol | Insulation diameter [mm] |
Cross-sections of the working core[mm²] Voltage range 12 kV24 kV36 kV |
Number of pieces in the package |
|---|---|---|---|
| CSE-400-24-D1 | 14.0-18.0 | 50-9550 | 1 set for 3 wires |
| CSE-400-24-D2 | 17.5-21.9 | 95-15070-95 | 1 set for 3 wires |
| CSE-400-24-D3 | 21.0-25.4 | 150-240120-18550-95 | 1 set for 3 wires |
| CSE-400-24-D4 | 24.0-27.5 | 300-400240-300120-185 | 1 set for 3 wires |
* For other cable construction, please contact the office
MV heads