Terminals for PROTECT surge arresters.
PROTECT Series Terminals
We are the only ones on the market to offer a complete set—a limiter plus the dedicated PROTECT clamp.
You gain compatibility, a certified product, and time savings.
Application:
They are used to establish electrical connections between insulated conductors of main and branch lines with aluminum (Al) or copper (Cu) cores, as well as for joining aluminum and copper conductors and cables.
| A | Straight line clamp for bare wires 16-120 mm² |
| B | T1 PROTECT Insulation piercing clamp for Al/Cu insulated cables 16-120 mm² |
| C | TTD1 PROTECT Double-sided insulation piercing terminal: main line Al/Cu 16-120 mm², insulated branch Al/Cu 16-95 mm² |
| D | NTD 1 Protect Single-sided insulation piercing terminal: bare Al main line 16–120 mm, insulated Al/Cu branch 16–95 mm² |
| E | TND1 PROTECT Single-sided insulation-piercing terminal: insulated main line AL/Cu 16-120 mm²; bare branch Al 16-120 mm² |
| F | F-type terminal - 16mm² insulated wire - 230mm (pipe). Compatible with insulation-piercing terminals. |
| G | Type G terminal - terminal for direct connection of the arrester to the transformer. |
| H | H-type terminal - terminal for direct connection of the arrester to a TOGA-type terminal. |
| I | Type P cable - flexible copper wire with a cross-section of 10mm², insulated, 700mm long, with a Ø 8mm ring terminal for connection to a grounding terminal. |
Compliant with standards: PN-EN 50483-1 and PN-EN 50483-4.
Clamps
Downloads:
PROTECT Surge Arresters
For protecting equipment against atmospheric and switching overvoltages in low-voltage systems. Used as a set.