Low voltage

Heat shrink 1-core through type J1TH

Joint designed for connecting single-core cables in PVC, PE, XLPE insulation and sheath type Y(A)(n)KY, Y(A)KXS, X(A)KXS, Y(A)KwXS, X(A)KwXS with a rated voltage of 0.6/1 kV. Technical assessment of the product for compliance with the PN-E-06401-03:1990 and PN-EN 50393:2007 standards.
See more

Heat shrink 4-wire pass-through type J4TH

Joint designed for connecting four-core cables in PVC, PE, XLPE insulation and sheath of type Y(A)(n)KY, Y(A)KXS, X(A)KXS, Y(A)KwXS, X(A)KwXS with a rated voltage of 0.6/1 kV. Technical assessment of the product for compliance with the PN-E-06401-03:1990 and PN-EN 50393:2006 standards.
See more

Heat shrink 5-wire J5TH type through

Joint designed for connecting five-core cables with PVC, PE, XLPE insulation and sheath of type Y(A)(n)KY, Y(A)KXS, X(A)KXS, Y(A)KwXS, X(A)KwXS with a rated voltage of 0.6/1 kV.
See more

Resin 4-wire branch GMO type

Joint designed for branching four-core cables to 2-, 3- and 4-core cables insulated and sheathed with PVC, PE, XLPE type Y(A)(n)KY, Y(A)KXS, X(A)KXS, Y(A)KwXS, X(A)KwXS with a rated voltage of 0.6/1 kV without the need to cut the main track. The joint enables work to be performed under voltage.
See more

Heat shrink 4-wire SMP type through-hole sleeve

Zobacz więcej

MFLV Mechanical Connectors

See more
This site is registered on wpml.org as a development site. Switch to a production site key to remove this banner.