Heat shrink 1-core through type J1TH Application:Joint designed for connecting single-core cables in PVC, PE, XLPE insulation and sheath type Y(A)(n)KY, Y(A)KXS, X(A)KXS, Y(A)KwXS, X(A)KwXS with a rated voltage of 0.6/1 kV. Technical assessment of the product for compliance with the PN-E-06401-03:1990 and PN-EN 50393:2007 standards. Construction: Connection of the

Low voltage Heat shrink 1-core through type J1TH Joint designed for connecting single-core cables in PVC, PE, XLPE insulation and sheath type Y(A)(n)KY, Y(A)KXS, X(A)KXS, Y(A)KwXS, X(A)KwXS with a rated voltage of 0.6/1 kV. Technical assessment of the product for compliance with the PN-E-06401-03:1990 and PN-EN 50393:2007 standards. See more

Hydraulic press HU 137 Application:Hydraulic press designed for crimping aluminum and copper connectors and terminals. Description: HU 137 – Hydraulic press with rotating head, designed for crimping connectors and terminals: Aluminum ranging from 16 mm² to 240 mm² Copper ranging from 35 mm² to 300 mm² Properties: Pressing force: 120

Electrohydraulic press ESU 137 Application:Electrohydraulic press designed for crimping aluminum and copper connectors and terminals. Description: ESU 137 – Battery-powered electric crimping tool for crimping connectors and terminals: Aluminum ranging from 16 mm² to 240 mm² Copper ranging from 35 mm² to 300 mm² Properties: Pressing force: 120 kN Weight:

Home>Products>LV and MV cable accessories>MV heads Cold shrink overhead type E3UERF Application:The head is designed for terminating single-core power cables with polyethylene insulation of the YH(A)KX(S), XH(A)KXS, XUH(A)KXS, XRUH(A)KXS type with a rated voltage of 8.7/15 kV, 12/20 kV. Construction: Termination of the working core with a thick-walled, pressed or

ESDC 620 electrohydraulic press Application:Electrohydraulic press designed for crimping aluminum and copper connectors and terminals. Description: ESDC 60 – Battery-powered electric crimping tool for crimping connectors and terminals: Aluminum ranging from 16 mm² to 240 mm² Copper ranging from 35 mm² to 300 mm² Properties: Pressing force: 60 kN Weight:

ESC 120 electrohydraulic press Application:Electrohydraulic press designed for crimping aluminum and copper connectors and terminals. Description:ESC 120 – Battery-powered electric crimping tool for crimping connectors and terminals: Aluminum ranging from 16 mm2 to 150 mm2 Copper ranging from 35 m2 to 150 mm2 Properties: Pressing force: 120 kN Weight: 6.28

Home > Products > LV and MV cable accessories > MV heads EUITH indoor heat shrink Application:Head designed for terminating single-core cables in polyethylene insulation type YH(A)KXS, XH(A)KX(S), XUH(A)KXS, XRUH(A)KXS with rated voltage of 8.7/15 kV, 12/20 kV.  Construction: Termination of the working core with a thick-walled, sealed, pressed or

Home > Products > Tools > Cable and wire tools category ESM 152 screw connector assembly tool Application:The ESM 152 tool is a portable electric impact wrench designed for tightening screws, connectors and cable lugs. Description:ESM 152 electric impact portable wrench for screwing connectors and cable lugs. Characteristics: No load

Home > Products > Tools > Cable and wire tools category Cable cutting tools Application:The tools are designed for cutting cables. Types:SCG-85 – hydraulically driven tool designed for cutting Al/Cu wires/cables with diameters up to Ø 85 mm. Pressure: 30 kN. Weight: 9 kg. 180° movable head. ESK 50 –