PSR 8 20 ADSS Rigid pass-through holder for suspending fiber optic cables with a permissible angle of deflection up to 25°. For short spans 100-150 m depending on climatic conditions. Removable elastomer sleeve for cable diameters 8-20 mm Closing with a clip. Opening possible with a screwdriver The holder body

ESF FOP/SFT FOP Pass-through holders with calibrated fiber optic cable clamps. On the pole – aluminium alloy bracket with mounting: four screws or two steel straps or a ø 14 mm screw The cross bracket has a mounting eye Movable joint allowing longitudinal and radial movements. The handle is made

SS 10 25 For hanging telecommunications and fiber optic cables. Parameters: Vertical strength: 500 daN NFC 20-540 climate tests: excellent result Excellent cable protection against vibration For angles greater than 25°, double mounting must be used. Cable type Symbol Without protective insertSS 10 25 B With protective insertSS 10 25

Hanging kit SS 10 25 For hanging telecommunications and fiber optic cables. See more ESF FOP/SFT FOP Pass-through holders with calibrated fiber optic cable clamps. See more PSR 8 20 ADSS Rigid pass-through holder for suspending fiber optic cables with a permissible angle of deflection up to 25°. See more

AS FO TC Application:Tie-down clamp for fiber optic cables. For cables with a maximum tension of 10 kN and a span length of up to 100 m. Construction: Galvanized steel wires Symbol Cable diameter range [mm] L [mm] Bundle length [mm] Belt color Weight [kg] AS FO TC 90-97 9.00-9.70

PA 509 clamping end bracket For suspending self-supporting single-pair flat telecommunications cables. The holder is made according to CNET’s technical specifications Black polyamide 6.6 body Stainless steel hook Ø 5 mm Information about all products is available in English on the website www.malico-telecom.com CASHT Universal Mounting Bracket PA 509 clamping

P…FO Application:Tensioning clamp for ADSS and round fiber optic cables. Cone-shaped clamp with high mechanical and climatic strength.The clamps are designed for spans with a maximum spacing of ≤ 100 m (*). Construction: Open body made of aluminum alloy Two wedges made of insulating material that properly distributes stress when

PA Application:A holder with high mechanical and climatic strength for Fig.8 and ADSS cables. Construction: Open body in the form of a cone Two wedges made of insulating material for mounting on the cable carrier or on the self-supporting cable Flexible attachment, length 120, 200 or 300 mm Symbol Carrying

CASHT Universal Mounting Bracket Universal mounting bracket for wooden, concrete and steel posts. Made of aluminum alloy with high mechanical strength Minimum breaking force:F1: 1700 daN – Single mount F2: 2500 daN – Double mount F3: 2700 daN – Fixing at an angle of 30oF4: 1700 daN – Fixing perpendicular

Fixing hardware CASHT Universal Mounting Bracket Universal mounting bracket for wooden, concrete and steel posts. See more PA 509 clamping end bracket For suspending self-supporting single-pair flat telecommunications cables. See more